DAPAudio IMIX-7.3 Guia do Utilizador Página 1

EM-7.3 ORDERCODE D2162

8 12. Mute Switch Use this witch to mute the according Microphone channel. 13. Mic Channel Signal VU Meter (Mic 1+2) Th

9 25 /26 /27. Equalizer SECTION (Master 1-3) The mixer’s Equalizer section allows shaping of the incoming audio signal. All mono input channels are f

10 38. Channel 4 Gain Channel 4 input level is determined by the Gain control. With the Gain control you can adjust the line input-sensitivity, whil

11 55. Channel 3 RCA Line Inputs Use to connect a line level device. You can select one of two the Line inputs with the Line select switch on the fro

12 Compensation of interference with balanced connections Maintenance The DAP Audio EM-7.3 requires almost no maintenance. Ho

13 Troubleshooting DAP Audio EM-7.3 This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps belo

2009 Dap Audio.

Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio EM-7.3 brings excitement to any venue. Whether you want sim

1 2 2 2 3 4 5 5 5 6 7 7 11 12 13 13 Dap Audio Dap Audio EM-7.3™ Product Guide Warning...

2 WARNING Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all

3 WARNING SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system has to: - be qualified -

4 Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. C

5 Description of the device Features Installation mixer. • 10 line inputs • 2 phono inputs • 2 mic inputs • 3 separate selectable otput zones • 3 ma

6 Backside Fig. 2 31) Power Supply Input Socket 45) Mic 1 Combo Input 32) Power Switch

7 Installation Remove all packing materials from the EM-7.3. Check that all foam and plastic padding is removed. Connect all cables. Always disconne